This post is part 6 of 6 in the series Bash to Zsh

Having used Zsh rather than Bash for over a week it was time to make the move permanent by migrating my shell customisations from ~/.bashrc to ~/.zshrc. Your milage may vary, but I was pleased to find I didn’t need to make any changes, and, that I could get rid of one command from the script because Zsh defaults to a behaviour I had to explicitly opt in to with Bash.

TL;DR: environment variables (including PATH) and aliases work just the same in Zsh as they do in Bash, so if those are the only things you alter in your ~/.bashrc, then you can just copy it over to ~/.zshrc. But, if you alter Bash settings in your ~/.bashrc, you’ll need figure out the equivalent Zsh options and replace the relevant lines with the appropriate Zsh setopt or unsetopt Zsh commands.

Read more

Tagged with:

This post is part 1 of 6 in the series Bash to Zsh

During their 2019 World Wide Developers Conference (WWDC 2019) Apple announced that the default command shell for their next OS release (macOS Catalina) from the Bourne Again Shell (Bash) to the Z Shell (Zsh). Not only will Apple be switching the default in Catalina, they will be removing Bash completely in an as-yet unspecified future update. Apple’s advice is clear — make the switch now so you’re ready!

Never being one to try hold back the tide, I dove right in and made the switch within 5 minutes of reading about the announcement. This series will document my experience of making the change.

Read more

Tagged with:

This post is part 80 of 92 in the series Programming by Stealth

In the previous instalment we got our first introduction to the concept of promises in JavaScript. By the end of the instalment we’d learned how to use promises to deal with single asynchronous tasks, but not how to use promises to deal with multiple interdependent asynchronous tasks. That’s what we’ll be focusing on in this instalment. In the previous instalment we looked at the arguments to .then(), but we ignored its return value. It’s the return value from .then() that this instalment revolves around. That return value is the key to dealing with interdependent asynchronous tasks by combining multiple promises into so-called promise chains.

You can download this instalment’s ZIP file here.

Read more

Tagged with:

This post is part 5 of 6 in the series Bash to Zsh

As I continue my move from Bash to Zsh at Apple’s strong suggestion I continue to bump into little differences that cause me minor problems. Today it was the fact that while Bash treats comments as comments even when they’re entered in an interactive shell, Zsh does not, at least not by default on MacOS.

TL;DRsetopt INTERACTIVE_COMMENTS

Read more

Tagged with:

This post is part 4 of 6 in the series Bash to Zsh

At Apple’s advice I’ve switched the login shell from Bash to Zsh on all my Macs. For the most part, what worked in Bash works in Zsh, but sometimes I do still want to get back to Bash to test something or to check something. You might imagine that simply typing bash from a Zsh prompt would get you a Bash shell, and you’d be right, sort of. When you just run the command bash you get a bare shell without the customisations that would have been applied when you opened a new Terminal window with Bash as your default shell. This will be immediately obvious because the prompt will be the basic bash-3.2$ as opposed to the hostname, current folder, and you’re username like you were used to.

The solution is really simple — pass the -l flag to signify that you want your new shell treated like a login shell, and hey presto, you’re back to Bash just like you remembered it 🙂

So, if you switch your Mac to Zsh, you get back to the Bash experience you had before with the following command:

bash -l

Tagged with:

This post is part 3 of 6 in the series Bash to Zsh

At Apple’s recommendation I’ve moved from Bash to Zsh on all my Macs. This has been a mostly smooth transition, but I have run into a handful of little gotchas. This week it was an error when trying to execute a command I’d been using in Bash for years. The error started zsh: no matches found.

The cause of this error is a subtle but important difference in how Bash and Zsh handle file globbing (expansion of the * character) when no files match the specified pattern. By default, Bash happily expands expressions that don’t match anything into an empty list. Zsh’s default behaviour is to raise an error and prevent the command executing.

TL;DR — setopt NULL_GLOB to enable Bash-like behaviour, and unsetopt NULL_GLOB to revert back to the Zsh-like behaviour.

Read more

Tagged with:

This post is part 2 of 6 in the series Bash to Zsh

Apple recently announced that it’s moving the MacOS from the Bourne-again Shell (Bash) to the Z Shell (Zsh), and advised developers to make the change now, so they’re ready when they remove Bash altogether in some later version of the OS. Since I’m a big believer in not swimming up-stream, I decided to take their advice and switched to the Z Shell immediately.

The first thing I noticed was that the default prompt Apple provides for Zsh on their OS gives a lot less information than their default for Bash did. This is a sample of their old Bash prompt:

bart-imac2018:Documents bart$

That tells me the machine I’m on (bart-imac2018), the folder I’m in (Documents), and the username the shell is running as (bart), and whether or not I have super-user privileges ($ means no, # means yes). These are all very useful things, particularly when you SSH around a lot and su/sudo to different accounts. Also, IMO showing only the top-level folder rather than the full path gives a nice balance between the prompt getting too big, and not knowing where you are. I’ve never felt an urge to change the Mac’s default Bash prompt.

I can’t say the same about the Mac’s default Z Shell prompt! This is what I get on the same machine with the Z shell:

bart-imac2018%

It only shows the machine name (bart-imac2018) and whether or not I have super-user privileges (% for no, # for yes)!

Thankfully getting back to the old Bash-like prompt is easy — the TL;DR version is that you simply need to add the following line to your ~/.zshrc file:

PROMPT='%m:%1~ %n%# '

If you’d like to understand how exactly that works, and what other choices you have, read on!

Read more

Tagged with:

Due to a problem with the File::HomeDir Perl module on recent versions of MacOS, the usual one-step instructions for installing Crypt::HSXKPasswd from CPAN don’t work on Macs ATM (June 2019).

TL;DR

sudo cpan -f -I File::HomeDir
sudo cpan Crypt::HSXKPasswd

Read more

Tagged with:

This post is part 79 of 92 in the series Programming by Stealth

Finally, after much teasing, we get our first taste of JavaScript Promises! This will just be a taste though, Promises are simultaneously really simple and really counter-intuitive. In many ways teaching promises reminds me a lot if teaching recursion — there is a tipping point where the concept goes from infuriatingly mind-bending to obvious and logical. Getting to that tipping point can be quite the challenge though.

So, we’re going to take it slow with promises. They will provide us with a way out of callback hell, but that path to salvation is unlikely to be obvious to you by the end of this instalment. It will take one or two more instalments until we get that far. All I can ask is that you please trust, me, how ever bumpy the journey gets, the destination is worth the struggle!

You can download this instalment’s ZIP file here.

Read more

Tagged with: