wp-content/uploads/2016/01/PBS_Logo.png

In this instalment we’ll continue our exploration for forms in Bootstrap, but we’ll zoom right in to just a single form control — the button. In many ways buttons are the single most important form element because they generally act as the trigger for the action the form has been building up to. If you have a form for composing an email, it will be a button that sends the email, if you have a form for entering payment details it will be a button that confirms your payment and finishes the transaction. If you’re just using a form to log in it’s a button that submits your credentials to the server. In short, buttons make forms go, so they’re worth spending a little time on.

Having looked at basic form inputs in the previous instalment, and then buttons in this instalment, we’ll be ready to look at the different options Bootstrap provides for laying out forms beyond the default stacked layout we’ve seen to date.

You can Download this instalment’s ZIP file here.

PBS 62 Challenge Solution

The challenge set at the end of the previous instalment was to improve upon the alter-generator form we’ve been working on over the past few instalments. You could use your solution to the previous challenge as your starting point, or you could use my sample solution instead.

The first part of the challenge was to transform the form into a properly marked up Bootstrap form complete with all the appropriate ARIA attributes to make the form accessible. There was very little to do here, and it was all simple by-the-book markup, so I don’t think theres any need to dwell on it. This is the form I ended up with at this point in the challenge:

The next instruction was to convert the text box to a text area and re-label it to Alert Body. Again, this is simple by-the-book markup, but there was one possible stumbling block — because I chose to use a different ID for the text area than the one I had use for the text box, I had to do a find-and-replace in the entire file to update every occurrence of the ID, both in the HTML markup and the JavaScript event handlers. This is my updated form group:

The third part of the challenge was to add a new form group with an appropriately labeled text box for adding a title to the alerts, and to update the event handler to render the alert with the title and body from the text box and text area.

The markup is by the book:

Updating the click handler for the create button is also quite straight forward, we use the same jQuery functions used in our starting code to query the document for the values from the form, build an alert from those values, and inject the newly created alert into the document, we just call those
same functions more often to query the form for two values rather than one:

The next part of the challenge was to add a checkbox to the form to allow the user to choose whether or not the generated alert would have a close button or not, and to update the event handlers appropriately.

The markup for this checkbox was again, by the book:

The JavaScript is also quite straightforward. Basically, I use jQuery’s $() function to
query the document for the checkbox, then use jQuery’s .prop() function to test whether or not the checkbox has the checked property. I can then use that value in if() statement wrapped around the code for injecting the close button:

The next part of the challenge was to add a group of radio buttons to allow the user to choose an icon for the alert. The choice of what type of icons to use was yours. I chose to use Font Awesome glyph icons as described in instalment 29. This involved importing the Font Awesome 4 CSS in the <head> section, and then the following form markup would work:

Note that I chose to use an inline button group.

Next the click hander for the button to create alerts needed to be updated to read the chosen icon from the radio group, and, to create and insert the appropriate icon.

Reading the value from a radio group is something we haven’t done in a while, so let’s remind ourselves how we do that with jQuery. What we need to do is query the document for the one member of the radio group that is selected, and then read out its value. Let’s break that down — first we’ll need all inputs with the name alert_icon_rb. The CSS selector for that is:

We don’t want all the members of the radio group though, just the one that’s checked, so we need to add the :checked pseudo-class to the selector:

Combining that CSS selector with jQuery’s $() and .val() functions we can get the value of the checked radio button with:

Putting it all together, my click handler now looks like this:

The penultimate part of the challenge was to have the form reset to its default state when the alert is created. The easiest way to do this is to call the form’s .reset() function as the last line in the click handler. I gave my form the ID create_fm, so I can get a reference to a jQuery object representing the form with $('#create_fm'). This gets me a jQuery object, not the form’s raw object in the DOM. But, I need the DOM object because .reset() is a DOM function, not a jQuery function. I can do that with jQuery’s .get() function. Putting it all together the very end of my click hander now becomes:

Finally, for extra credit, was the conversion of the two buttons into a single full-width button group. Anyone who got this working deserves double-extra-credit, because it was actually more difficult than I realised. In Bootstrap version 3 there was a special type of button group for full-width collections of buttons, but that was removed in Bootstrap 4. It is still possible though, but not obvious, and without the help of Google & Stack Overflow I doubt I’d ever have found the relevant section in the migration documentation.

Despite being hard to find, the final answer is very simple. Wrap the two buttons in a div with the class btn-group to combine the two buttons into a nice single grouped button, then turn that button group into a flex box by adding the class d-flex and set both buttons to want to be full-width by adding the class w-100 to each:

You’ll find my full sample solution in the ZIP file as pbs62-challengeSolution.html.

Bootstrap Buttons

In pure HTML there are two ways to produce a button — there’s the old way, an <input> with type=button, type=submit, or type=reset, and there’s the new <button> tag. Note that when you’re writing HTML 5 you should avoid the old <input> approach and use the new <button> tag instead.

So, while HTML itself already takes an unusually broad view of what a button can be, Bootstrap takes things even further, allowing just about any element to be rendered as a button. However, the whole raison d’être for buttons it to trigger an action, so semantically it makes sense to confine your use of the Bootstrap button classes to what I’ll term action elements, generally <button>, <input>, and <a>.

Note that all the code snippets below can be found in the file pbs63a.html in the ZIP file.

Button Basics

To render something as an opinionated Bootstrap button you need to apply two classes, btn, and an appropriate style class.

There are the style classes you would expect to give you the eight default filled button colours: btn-primary, btn-secondary, btn-info, btn-success, btn-warning, btn-danger, btn-light, and btn-dark.

If you’d prefer and outlined as opposed to a filled button there are also eight classes for those: btn-outline-primarybtn-outline-dark.

Then there is one final more unusual option, btn-link to give you a button that doesn’t look like a button at all! (More on that later.)

Varying Button Sizes

Bootstrap buttons don’t need to be their default (quite large) size, they come in miniature an extra large too! To make a button of any style smaller add the class btn-sm, and to make any button larger, add btn-lg

Links as Buttons and Buttons as Links

Using Bootstrap’s button classes we can render any link as a button by giving it the class btn plus one of the regular style variants:

But, we can also render any button as a link by giving it the classes btn and btn-link:

Button Groups & Toolbars

While HTML doesn’t support combining multiple buttons into a single UI element, Bootstrap does, and it calls this new UI element a Button Group.

Creating a basic button group is very straightforward, just wrap your buttons in a containing tag (usually a <div>), and give that wrapper the class btn-group. To support screen readers you should also add role=group to the wrapping tag, and if there is a sensible label you can give the group as a whole, you can also add aria-label="your label" (or if there is some descriptive text elsewhere in the page, give it an ID and link to it with aria-labelledby="the_label_id").

Button groups are most often used within the UI of a web app, but you can use them anywhere. You could use them for social media sharing links:

Button Group Sizes

Most conveniently, you and re-size all the buttons in a button group at once by applying btn-group-sm or btn-group-lg to the wrapping element.

Combining button groups with some kind of icon sent, like glyph icons, and sizing them appropriately, you can do very nice things like this:

Button Groups as Form Controls

As we saw with the bonus credit part of the challenge, using a button group as a form control is not as straight forward as you might expect. It’s not difficult, it’s just usual, and IMO, non-obvious.

As a reminder, this is how to do it:

So what’s going on here?

Firstly, to get the button group to expand to the full width of the form, we are covering it into a flex box by adding the Bootstrap utility class d-flex. Each item within the button group has now become a flex icon, but, it will still retain its default width. How do we force each button to expand? We use Bootstrap’s sizing utility classes. For a two-button button group we could give each button the class w-50, and it would work, but that’s not a good general solution because there is no w-33 for 3-button button group, let alone a w-20 for a five-button group etc.. The solution is to make use of the fact that flexboxes squash content to make it fit, so, perhaps counter-intuitively, we set the width each button within the group to 100% with w-100. This won’t make each button actually be the full width, it will just make it try, and the flex box will constrain the buttons onto a single row, and since they all want to be the same size, the buttons will be equally divided across the flex box.

Button Toolbars

A button group is a group of buttons, so what would you call a group of button groups? A Button Toolbar! As their name suggests, Bootstrap Button Toolbars are very much designed to be used within web app UIs rather than within regular web pages.

To create a button toolbar simple wrap your button groups in another tag (also usually a <div>), and give the wrapper the class btn-toolbar. To facilitate accessibility, you should also give the wrapper role=toolbar, and consider labelling it with aria-label="your label" (or linking to another label with aria-labelledby="the_label_id"). Finally, to add the desired amount of spacing between button group, use the Bootstrap spacing utilities, e.g. mr-2 to add a small right margin.

As a contrived example, here’s the code for a simple text-formatting button toolbar:

Final Thoughts

We’ve now covered the basics of Bootstrap forms — we can collect textual data from users with text boxes and text areas, we can collect selections from users with dropdowns, checkboxes, and radio buttons, and we can trigger actions with buttons. When it comes to laying out our forms we’ve just scratched the surface though — having only seen Bootstrap’s default simplistic stacked layout. That will change next time when we explore some of the other form layout options Bootstrap provides.